Fence of welded panels and Egoza razor mesh
The main parameters of the fence panels with barbed mesh
Fence height to 2430 mm
The height of razor mesh to 2700 mm
Length of one section 2500 mm
Diameter of grid rods up to 6 mm
Cell size 50 x 200 mm
Fence of welded panels, reinforced with Egoza razor mesh
The fence of welded panels or the fence of welded grid can be easily strengthened through the use of Egoza razor mesh. The fence is assembled from standard pillars, panels, clamps and other elements, and then a fenced Egoza razor mesh is attached to the welded panels with clips.
Egoza razor mesh can be used to prevent digging under the fence. For this purpose, a razor mesh is used with a greater height than the height of the fence, while a part of the Egoza razor mesh deepens into the ground.
On top of the fence of welded panels and Egoza barbed mesh, you can install any concertina or flat Egoza barrier using special holders.
Specifications
| Fence height, mm, to | 2430 |
|---|---|
| Razor mesh height, mm | 2000; 2400; 2700 |
| Length of one section, mm | 2500 |
| Diameter of grid rods, mm | 3, 4, 5, 6 |
| Cell size, mm | 50 x 200 |
